Acrylic paint in acrylic paint tools

Acrylic is manufactured fiber derived from a colorless, flammable liquid polymer. It is soft, resistant to wrinkles and collapsing and there is a property of dry quickly. Acrylic paints can be used in glossy or matte finishes. With oils, the quantity of pigments of quantity and particles can modify the paint Sheen. Similarly, agents of carpet can be added to give a dull eye. Run or varnishes are used to modify the Sheen also.

Fundamental advantage and disadvantage of acrylic image is that it dries very quickly. Thus, it is preferable that expose you your picture its benefit and at the same time envelope painting detriment to draw maximum benefit. However, before continuing to stimulate this type of drawing, you must understand some of the instruments of this type of painting, because each artist is incomplete without his tools.

Acrylic paint tools:

Colours:

Selecting colors, should not use too many at once. Using only a few colors can be created no shadows. The colors that are normally recommended are: burnt Umber, Alizarin titanium white blue purple, ultramarine blue or cadmium red and black.

Brushes:

1 Brushes fan - they are used for various things, for example with respect to the skin of paint, grass, or for the manufacture of the sheet, etc.

2 Dent this brushes are typically used to give the effect of spraying, abstract splash, stone texture, etc. For example, to give the effect of the sky constellation of stars.

The surface of the painting:

1 Wood-one of the most commonly used for acrylic surfaces is wood. It has a grainy texture, which is sometimes essential to the concept of the image. However, it must first sealed with adhesive plaster or acrylic medium. If this is not done, the liquid becomes quickly soaked by the tree, leading to failure or frustrating efforts.

2 Suite-suite is a very smooth surface to paint on. Again the surface must be prepared with plaster.

3 design, this area is the most widely used surface for acrylic paint. Extra Smooth and liquid drainage prevention, fast is performed using plaster of Paris.

Support:

Water and acrylic media are used for dilution of acrylic paints. Water works very well, but over time, cracks in the paint. The use of the additional delays in the procedure of cracking much more to come.

Last but not least; large plastic pallet is mandatory, or something that is robust and waterproof to keep them under paintings. Here are all the blend color.

Technical drawing:

All drives must be vertically painted by a layer of plaster and the entire system must be left for 30 minutes. Then using sandpaper of course, it is supposed to sand on the surface. The second layer of plaster, but in a horizontal manner apply now. Sanding technique is repeated after receiving a plaster dry. Sanding of painting technique is repeated on personal choice - to what we think, the surface of the canvas became sufficiently smooth. In the case of duplex or wood must be coating and waterproofing necessary.

Now with nice, someone can transform imagination into pictorial reality. However, it is offered to the v″zmnožnost that they must begin with ideas on a sheet of paper, Board or cheap fabric, and then go to its surface; they want to submit their photos.